1 FRONT, 2 SIDE & 2 REAR SIDE SPLITTERS + 2 SUPPORT RODS 2013-2014 Mustangs

Description

Add a race inspired, track tested, look to your Shelby by installing this
Brand new SBS PERFORMANCE Front splitter, 2 side (rocker) splitters and 2 rear side splitters for 2013-2014 Ford Mustang V6 & GTs made from 1/4" Black ABS plastic (same as the Ford Racing Leguna Seca splitter which retails for 0.00). 2 brand new support adjuster rods.
It bolts directly to the front bumper through the stock splitter holes (13-14s, bolts to the bumper, through the upper splitter, after the lower 3 pieces are removed).
Comes with:
1- 1/4" ABS black splitter.
2-  6" Support rods (shipped seperately)
12- 6m 1.0 bolts x 60mm
4- #8 -1 1/2" screws with 1 1/4" washers
2-1/4" ABS black side splitters
2-1/4" ABS rear side splitters
26- 1/4"-20 x 1" screws
26- 1/4"-20 U Nuts
ALSO NOTE, EACH SPLITTER IS MADE AFTER YOU PURCHASE AND PAY FOR YOU SPLITTER. ALLOW UP TO 5 BUSINESS DAYS BEFORE SHIPPING.
This splitter is designed to create down force on the front of your car. The higher the speeds, the more downforce is created.  DO NOT USE THIS Splitter without installing at least 2 spoiler support (adjuster) rods!  Returns are accepted only if splitter has not been installed, unless there is a fitment issue or the incorrect splitter was purchased-based on year or model mustang.
Note: The 2 support adjuster rods are shipped separately from the distributor
Note: We design and manufacture splitters. Support rods are included as a package in this listing as a courtesy.  They are drop shipped from their distributors, not shipped with the splitters.  We have no control of availability.
Note: not responsible for any damages that may occur from installing this product, especially at higher than highway speeds or racing.   Installed or modified splitters are not returnable for a refund.
FYI: The grainy side of the automotive ABS is the top/upper side of the splitter.  The smoother side of the splitter is the bottom.  The grainy side is extremely durable.  Theses splitters are almost impossible to break which makes it so ideal for this applications.  Please note that bottom smoother side may come with lines from manufacturer and the bottom side is very easily scratched, even a soft microfiber cloth can scratch because it is raw, unfinished ABS plastic.  Some buyers have opted to have the bottom side painted and have installed the splitters upside down, allowing the painted side to be on top.
Attention:  SBS Performance Parts LLC will be closed from Saturday, July 11, 2020 to Wednesday, July 15, 2020. We are all going on a short vacation after a extremely busy 2020.  Inspite of the CV19 pandemic, we actually have been busier than ever.  All splitter items are made to order.  We will begin fulfilling orders when we open back up on July 16, 2020.  We apologize for any inconvenience.
Please note that black ABS is a solid plastic that is the actual product color.
This product is designed to have the grainy, textured side facing up or out.
The bottom, smooth side may have some sheen but it is not a finished product and it can scratch easily. The smooth side can be installed facing up or out, only if it is painted or you have a wrap overlaid on it.