9V Dying Battery Simulator For Guitar Pedals, Sag Control For Fuzz

Description

9V Dying Battery Simulator For Guitar Pedals
Hi All,
I'm offering international shipping
for a limited time, to see how
things are going these days.
Shipping times are very long these days, they take about 8-10 weeks,
so if you can't - or don't have the patience to wait, please don't buy it.
Many musicians like the distinguish sound of a dirt guitar pedal - when powered by
a half-full or near "dead" 9V battery such as; Fuzz, distortion and over-drive.
Most similar products in the market are basically a serial potentiometer that limits the
current to the pedal – and acts like a voltage divider with the pedal.
The drawback of these designs is that the voltage going to the pedal, will vary according
to the current consumption, and will not be stable.
This design is a
transistor-based regulator
that will deliver stable voltage to the pedal at any given settings.
There is also a LED that will dim or lit brighter according to the voltage setting of the knob.
For convenience, the unit has a built-in output cable and an input jack - so no other cables are needed.
When operated from a 9VDC source, the output voltage can be set to the range of about 6–8.3VDC.
With a lower or higher voltage power source, the voltage will vary accordingly.
Specifications:
Input Voltage: 18VDC max
Input Polarity: Center Negative
Output Polarity: Center Negative
Output Voltage: Variable ~ 6-8.3VDC @9VDC input
Output Current: 150mA max.
Input Jack: 5.5mm X 2.1mm
Output Jack: 5.5mm X 2.1mm, right angle
Dimensions:
Height: 2.1cm
Length: 8cm
Width: 3.8cm
Attached cable length: 20cm
Shipping:
Next Working day, registered mail via Israel post with tracking number
Please note: We strongly support recycling, and do our best to use recycled packages
and packing materials in our shipments. If you wish otherwise, please drop us a note.
Hand Manufactured: By AQUA-AUDIO