ABS undermount FRONT SPLITTER & 2 SUPPORT RODS- 2014-2019 C7 Corvette Stingrays

Description

Accent your ride with this track tested, race inspired, brand new SBS PERFORMANCE Parts LLC's Front splitter for 2014-2019 C7 Corvettes Z51 and base Stingrays, base GS and Base Z06 (does not factory plastic or carbon fiber equipped C7s aero 2 or aero 3 packages).  This splitter is made from 1/4" Black ABS automotive plastic which is strong, yet flexible.  Great way to add aero down force to your Vette's front end and also to protect your factory front splitter from steep drive ways, curbs and speed bumps.
Bolts directly to your C7 front bumper and bellt pan and your subframe
Comes with:
Instructions
1- 1/4" automotive ABS black splitter 72" x 25".
21- #6x1" phillip flat head machine screws
21-1-1/4" x 3/16" fender washers
7- rubber spacers
2 - generic support rods
NOTE: Tools required: Jack, jack stands,7mm & 10mm wrench/socket, phillips screw driver, & Locktite thread lock.
This splitter is designed to create down force on the front of your car. The higher the speeds, the more downforce is created. Recommended that you install 2 spoiler support (adjuster) rods!
Returns are accepted only if splitter has not been installed, unless there is a fitment issue or the incorrect splitter was purchased-based on year or model mustang.
Note: We design and manufacture splitters. These splitters are made to order.  Buyer may request modifications to the SBS Performance Parts LLC's design. The grainy side of the automotive ABS is the top/upper side of the splitter. The smoother side of the splitter is the bottom. The grainy side is extremely durable. Theses splitters are almost impossible to break which makes it so ideal for this applications. Please note that bottom smoother side may come with lines from manufacturer and the bottom side is very easily scratched, even a soft microfiber cloth can scratch because it is raw, unfinished ABS plastic. Some buyers have opted to have the bottom side painted and have installed the splitters upside down, allowing the painted side to be on top.
Please note that black ABS is a solid plastic that is the actual product color.  This product is designed to have the grainy, textured side facing up or out.  The bottom, smooth side may have some sheen but it is not a finished product and it can scratch easily. The smooth side can be installed facing up or out, only if it is painted or you have a wrap overlaid on it.