Dunlop - MXR - Mini ISO-Brick - Power Supply for guitar effects pedals

Description

Shop
Favorite
FAQ
Policies
Contact
Dunlop ISO Brick Mini Power Supply
Phantom48 is proud to be an Authorized Dunlop Dealer!
MXR MINI ISO-BRICK POWER SUPPLY - M239
Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need—all while taking up less space than a candy bar.
This pedal can be powered by the included ECB009 18-volt adapter.
The Mini Iso-Brick Power Supply supplies quiet, noise-free DC power to wide range of pedal types while taking up less space than a candy bar. Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need.
First, let’s talk outputs. The Mini Iso-Brick Power Supply has five, and each is fully isolated to eliminate obnoxious, gig-ending ground loop noise. Four of the outputs supply 9 volts of power at 300mA, while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on your needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital.
And don’t let the five outputs restrict you—if you need to add an extra pedal, the Mini Iso-Brick Power Supply has you covered. It comes with a splitter cable that can be used to connect two pedals to a single output, provided they require the same voltage and you don’t exceed the output’s current rating. You can do this with all of the outputs simultaneously—just purchase the extra cables to do so.
Finally, troubleshooting can be a hassle on dark stages, so the Mini Iso-Brick Power Supply comes equipped with LEDs to let you know that all your connections are solid. Combine that with a lightweight housing that's built like a tank, and you can step on stage with confidence that your pedalboard will stay powered from gig to gig.
Key Features:
Input 18V At 2 Amps regulated supply (positive barrel negative center 5.5mm x 2.1mm plug)
Outputs 9-18V @ 800mA (switched)
(4) 9V @ 300 mA
(all positive barrel negative center 5.5mm x 2.1mm)
*Note: Using a split cable allows you to share one output with two devices. Remember the straight plug is the end that goes into the Mini Brick DC output and the two 90° to the effects (this helps minimize ground return current noise). position
Audio-Technica
Bogner
DigiTech
Dunlop
EarthQuaker Devices
EBow
Electro-Harmonix
Emerson Custom
Eventide
Heil Sound
Hosa Technology
ISP Technologies
JHS Pedals
Lava Cable
Mad Professor
Maxon
MXR
On-Stage
Peterson
Power-All
Radial Engineering
Seymour Duncan
Suhr
TC Electronic
TC-Helicon
Wampler Pedals
Way Huge Electronics
Xotic Effects
Contact Us
Send us a message.
About Phantom48
Phantom48 is an Authorized Dealer for all of the new items we sell. We carefully monitor our stock to ensure item availability, and we process orders the same or next business day. Most orders ship for FREE. Send us an email with any tech support question. We own and operate a studio, and we have deep knowledge of computers and signal flow. If you have a question, don't hesitate to send us a message.
Warranty Information
Every item we sell is backed by the Manufacturer's Warranty. If you have any problems, we will replace your item immediately if a product arrives and it is not functioning.
USA Customers:
Because we are authorized dealers, your best option is to contact the manufacturer directly. At any rate, just contact us if you have problems, and we can advise what you should do.
International Customers:
Please note that our equipment carries a USA warranty, so all international warranty issues must be handled by Phantom48. All items must be returned to Phantom48 for all warranty repair or replacement issues. You will be responsible for all shipping/handling expenses.
***International Buyers Please Note:
Import duties, taxes, and customs charges are not included in the item price or shipping cost. The charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.